-I STARTED THIS COMPANY SELLING MY RIGS AND A FEW HOOKS 10 YEARS AGO. WHEN I GOT TOO BUSY TO KEEP UP THE RIG MAKING I FOUND SOMEONE ELSE TO MAKE THEM TO MY SPEC. NOW THE TIME HAS COME TO RE-VAMP ALL THE RIGS AND UPGRADE THE COMPONENTS TO THE VERY BEST THAT I SELL.
NOW ALL RIGS ARE REDUCED IN PRICE, USING SUGGESTIONS AND FEEDBACK FROM CUSTOMERS.
OUR AIM IS NOT TO SELL CHEAP RIGS BUT TO SELL THE BEST RIGS ON THE MARKET AGAIN.

Island BASS Rig -BR1

Island BASS Rig -BR1

 

Special ledgering rig designed to be used on the drift over wrecks, reefs, rough ground or sandbanks. Long Big Mouth hooks.

 
Needles CONGER Rig- BR2

Needles CONGER Rig- BR2

 

350lb Heavyweight rig for Mackerel flapper or whole squid/ Cuttle complete with heavy duty 400lb crane swivel.

 
Island FLATTIE Rig -BR3

Island FLATTIE Rig -BR3

 

3 X Hook flowing trace. This rig is ideal for scratching about on the bottom for Flatties and especially Dabs. The beads and sequins are an effective visual attraction; for use with worm baits. *** I had a 2lb 15oz Sole using these rigs on Monday night (the 4th of October, 100yds off Cowes waterfront) using the "Islander" 6-12lb boat Rod. It bent in half and didn't stop jumping about until it was netted.

 
Island TURBOT  Rig -BR4

Island TURBOT Rig -BR4

 

This Turbot rig has been designed by a friend of mine Dale Edmunds and has accounted for loads of double figure Turbot. He thinks the spinning blade has got a lot to do with its success. Like all our rigs we use the best quality components.Now with "LONG BIG MOUTH" Aberdeens. WORKS VERY WELL FOR RAYS AS WELL.

 
Island RAY rig -BR5

Island RAY rig -BR5

 

An Island Downtide rig for the numerous types of Ray- the rig is very versatile for other species, such as Bass , large Flat fish, Smoothounds etc. The body is 60lb mono. 

 
Island WHITING  Rig -BR6

Island WHITING Rig -BR6

 

This rig is designed specifically to target Whiting from a boat. The super luminous tubing and lumi beads acts as an attractor which the Whiting home in on in the murky depths. The Eagle Claw Southern Sproats are razor sharp.

 
Island Uptide COD Rig -BR7

Island Uptide COD Rig -BR7

 

Designed exclusively for Cod, can be used for Uptiding or Dowtiding. Rig uses 5/0 & 7/0 Long Big Mouth Aberdeen 

 
Island TOPE Rig -BR8

Island TOPE Rig -BR8

 

Revamped rig with VMC 9/0 Faultless Octopus hook plus 15inch bite (75lb x 7 strand wire) to 40inch 100lb line. and then allied to 2 x quality  1/0 crane Swivel.

 

 
Island SMOOTHHOUND Rig- BR9

Island SMOOTHHOUND Rig- BR9

 

Featuring a VMC Faultless Octopus (E299) Upside down Pennel, running ledger rig, complete with Zip slider, perfect for Crab baits for those Hounds.

 
Island POLLOCK Rig -BR10

Island POLLOCK Rig -BR10

 

Our new Pollock rig is a beauty. A 10ft  x 30lb Amnesia snood with a 6/0 Red Devil Aberdeen on a 13inch x  Black boom and a Fishtek 20lb weight link attached. (rather than a paper clip).Each rig comes with Jelltex Shad to get you started. Just attach your leader to the rig and never miss a drift.

 
ISLAND Portland rig -BR11

ISLAND Portland rig -BR11

 

This is the Island interpretation of the Classic Portland rig, which is used mostly for Wreck Fishing, Pinnacles etc. Deadly for large Cod, Pollock and Bass. See below full spec. Sold with a choice of 3 x colour Sandeels.

 

 
Island BREAM Rig -BR13

Island BREAM Rig -BR13

 

This rig uses 40lb Amnesia rig body and 25lb Amnesia snoods on a 2 up 1 down design using magic size 2 circles. This rig has accounted for masses of Bream up to 5lb+. Our most popular boat rig.

 
Island BREAM Rig -BR13ss

Island BREAM Rig -BR13ss

 

This rig uses 40lb Amnesia rig body and 25lb Amnesia snoods on a 2 up 1 down design using magic size 5 Stainless Mustad O'Shaughnessys. This rig has accounted for masses of Bream up to 5lb+. Our most popular boat rig.

 
Island GURNARD rigs -BR14

Island GURNARD rigs -BR14

 

2 x 25lb snoods on a 40lb Trace body with spinner blades and beads armed with a size 1 Southern Sproat worm.

 
Heavy Duty Needles COD Rig -BR20

Heavy Duty Needles COD Rig -BR20

 

A new Heavy duty 2 meter long (100lb supple line) Downtide Cod rig with either 3 x Mustad O'Shaughnessys or Long Big Mouth Round bend hooks . Pennel armed with 9/0 and 6/0 hooks. Second Spur snood with 8/0 and stand -off tubing.attched to  Rolling crimp swivel. Designed for the big Needles or Norway Cod fishing arenas.

 
ISLAND Boat Rig - Sampler

ISLAND Boat Rig - Sampler

 

This pack includes

1 each of the 13 ISLAND Boat Rigs.

BR1,BR2,BR3,BR4,BR6,BR7,

BR8,BR9,BR10,BR13,BR14,

BR15,BR20.

**IGNORE PHOTO

 
Heavy Duty Conger Wrecking rig.

Heavy Duty Conger Wrecking rig.

 

Heavy Duty Conger Wrecking rig. Sold in Singles.This trace is hand made in Plymouth by a experienced conger angler, the trace body is 1.8mm mono in a  bolt rig style design. Attached to the trace is a 10/0 O shaughnessy , which will handle any size conger.

 
Snelled Conger trace

Snelled Conger trace

 

Beautifully Snelled Conger trace. A knot that wont slip on those Conger trips. A lethal combination. Perfectly tied by Bill Trevarthen.

 
Bespoke HD Shark traces

Bespoke HD Shark traces

 

300lb & 500lb Traces for British Shark fishing.300lb x 10ft rubbing trace & choice of 300lb x 5ft or 500lb bite.

12/0 VMC BAY KING welded eye Big Game hook on the 500lb trace

10/0 VMC BAY KING welded eye Big Game hook on the 300lb trace.

 
Lumi Halibut or Big Fish rig.-with Starlight

Lumi Halibut or Big Fish rig.-with Starlight

 

These rigs are purpose made for big fish in Norway but can be used for other species. They come in 3 x Colours and 3 x sizes - 8/0, 10/0 and 12/0. -Click on the magnifying glass to see all three colours.

36inches long with 2 x Colorado spinner blades and a clevise with Lumi and other coloured attactor beads, the Eagle Claw O'Shaughnessy hook is sheathed in Luminous green tubing and a six inch Octopus skirt. It has a breakable Starlight installed inside the tubing which you break before use.Sure to attract the big fish in the depths.

 
Livebait (Deadbait) rig For Norwegian Halibut.

Livebait (Deadbait) rig For Norwegian Halibut.

 

Livebait (Deadbait) rig for Norwegian Halibut. This is probably the only rig you need to catch Halibut in Norway. Custom made (in House) rig for 1lb-3lb Coalfish baits. This rig is used on the drift just off the seabed. The rig is constructed for perfect presentation of the bait.

Picture shows a 15" Mylar Shad (not included) with a 6/0 VMC Wreckmaster Treble and a crimped (static) 8/0 Faultless Octopus hook. Total length is 24".

 
Isle of Wight PLAICE boom

Isle of Wight PLAICE boom

 

2 x sizes NOW- 21inch Metal boom with 50+ 8mm beads (large)+ 100 x 5mm beads (small) crimped and shrink tubed with Nickel rolling swivels. Centre Barrel swivel with Interlock snap. This is a very successful rig for drifting for Plaice. Lots of bigger fish caught on these. I drift these with a size 1 ss Circle streamer hook and short snoods (8-9inch)Another good ragworm hook with these is the Vanadium red worms size 1. The Black & Green work better on the Mussel beds, The Red & Yellow are better on the sand. Other colours can be made up. Just order them and email what colour you prefer.

 
 Plaice Dayglow Colourflash booms

Plaice Dayglow Colourflash booms

 

These new attracter booms are a slimmer design for fishing for Flatfish of all types. The lower diameter creates less drag in the tide and allows the use of a smaller lead. Can be cast from the boat or from the Shore for Plaice, Flounder etc.

 
Cardoc Shark Trace

Cardoc Shark Trace

 

Nylon covered SS wire trace without hook. Breaking strain 95kg (200lb) Length 4.57m (15ft.